|
Σχόλια |
The TG Caliper is an affordable digital caliper that can be used, for example, to measure the thickness of thermal pads or the length of screws. Other typical measurements include determining inside and outside diameters as well as the wall thickness of soft and hard tubes. The measuring range is up to 150 mm / 6 inches. The measured values are displayed on the LCD in either the metric or imperial system, with a resolution/readout of 0.1 mm / 0.01 inch and an accuracy of ±0.2 mm / 0.01 inch. A zero function allows two measurements to be compared easily |
